
تعداد نشریات | 13 |
تعداد شمارهها | 623 |
تعداد مقالات | 6,502 |
تعداد مشاهده مقاله | 8,650,062 |
تعداد دریافت فایل اصل مقاله | 8,256,494 |
بهبود پیوندپذیری الیاف سه بار بازیافتشده خمیرکاغذ کرافت با پوششدهی چندلایه کایتوزان/کربوکسیل متیل سلولز | ||
پژوهشهای علوم و فناوری چوب و جنگل | ||
مقاله 6، دوره 25، شماره 4، اسفند 1397، صفحه 87-101 اصل مقاله (889.86 K) | ||
نوع مقاله: مقاله کامل علمی پژوهشی | ||
شناسه دیجیتال (DOI): 10.22069/jwfst.2018.15806.1775 | ||
نویسنده | ||
حمیدرضا رودی* | ||
عضو هیئت علمی/دانشگاه شهید بهشتی | ||
چکیده | ||
سابقه و هدف: امروزه بازیافت کاغذهای باطله یک راهکار مناسب برای مصرف ضایعات کاغذی و به عنوان یک منبع غنی الیاف سلولزی توسعه فراوانی پیدا کرده است. با توجه به اینکه ویژگیهای ساختاری این نوع الیاف بسیار متفاوت از الیاف بکر میباشند، اولین و مهمترین چالش در بکارگیری آنها، مناسبسازی آن برای استفاده مجدد در صنعت کاغذسازی است. بنظر میرسد اگر این الیاف به صورت مکرر مورداستفاده قرار گیرند، قابلیت استفاده از آنها کاهش یابد. تحقیقات اخیر نشان میدهد که تکنیک لایه به لایه روش خوبی برای اصلاح خواص الیاف سلولزی و بهبود پیوندپذیری آن میباشد. در این تکنیک، الیاف سلولزی با ذرات یونی با بار مخالف در یک محیط واکنش قرار میگیرد و طی آن ذرات عمدتاً با جاذبة الکترواستاتیکی توسط سطح الیاف جذب میشود. در نتیجه مقاومت شبکه الیاف بطور قابل ملاحظهای توسعه مییابد. لذا در این تحقیق، امکان اصلاح و توسعه پیوندیابی الیاف کرافت سه مرتبه بازیافتشده با استفاده از تکنیک لایه به لایه مورد بررسی قرار گرفته است. مواد و روشها: برای انجام این تحقیق، ابتدا الیاف کرافت سه مرتبه در چرخه بازیافت قرارگرفت. سپس الیاف سهبار بازیافتشده با روش لایه به لایه و با لایهنشانی یک در میان 1 درصد پلیمر کایتوزان کاتیونی و 1 درصد کربوکسیل متیل سلولز (CMC) آنیونی بر مبنای وزن خشک الیاف لایهنشانی شدند. لایه نشانی برای تشکیل یک، دو و سه جفتلایه از این پلیمرها بر روی سطح الیاف انجام گرفت. برای تشکیل جفتلایههای متوالی، 500 میلیلیتر سوسپانسیون خمیر الیاف با خشکی حدود 6/0 درصد به مدت 10 دقیقه با محلولهای کایتوزان و CMC توسط دستگاه DDJ بهم زده شد. از نمونه خمیرکاغذها، کاغذهای دستساز با وزن پایه g/m2 80±5 تهیه و ویژگیهای آن مطابق روش-های استاندارد TAPPI مورد ارزیابی قرار گرفت. همچنین از نمونههای ذکرشده تصاویر الکترونی تهیه شد تا تغییرات در ساختار سطح الیاف مورد ارزیابی قرارگیرد. یافتهها: تغییرات متناوب پتانسیل زتا حاکی از تشکیل لایههای متوالی جفت پلیمر کایتوزان و CMC بر روی سطح الیاف بازیافتی کرافت میباشد. ارزیابی مقاومتهای کاغذ تهیهشده تأیید میکند که با تیمار الیاف سهبار بازیافتشده کرافت با روش لایه به لایه و جذب این دو پلیمرها مقاومتدهنده، پیوندیابی الیاف توسعه یافته است. زیرا دانسیته ظاهری، شاخص کششی، پیوند داخلی و انرژی جذب کششی کاغذ بطور معنیداری افزایش یافتهاند. سفتی خمشی کاغذ بعلت افزایش دانسیته (کاهش ضخامت) کاهش قابل ملاحظهای را نشان داده است. در ریزنگارهای الکترونی تهیه شده نیز تفاوت واضحی در سطح الیاف تیمارشده نسبت به الیاف تیمارنشده مشاهده شده است که بیانگر جذب پلیمرها میباشد که منجر به توسعه سطح پیوندیافته بین الیاف و افزایش مقاومتهای کاغذ میشود. نتیجهگیری: از نتایج این تحقیق میتوان نتیجه گرفت که این امکان وجود دارد که با استفاده از روش لایه به لایه و با تشکیل چندلایه هایی از پلیمرهای کایتوزان و CMC، قابلیت پیوندپذیری الیاف کرافت بازیافت شده را اصلاح و ویژگیهای مقاومتی کاغذ حاصل از آن را بهبود بخشید. | ||
کلیدواژهها | ||
کاغذ باطله؛ تکنیک لایه به لایه؛ کایتوزان؛ کربوکسیل متیل سلولز؛ پتانسیل زتا | ||
مراجع | ||
1. Agarwal, M., Lvov, Y.M., and Varahramyan, K. 2006. Conductive wood microfibres for smart paper through layer-by-layer nanocoating. Nanotechnology. 17(21): 5319–5325. 2. Agarwal, M., Xing, Q., Shim, B., Kotov, N., Varahramyan, K., and Lvov, Y.M. 2009. Conductive paper from lignocellulose wood microfibers coated with a nanocomposite of carbon nanotubes and conductive polymers. Nanotechnology. 20(21): 215602-215610(2009). 3. Bachaman, J.S. 1968. Stiffness: its importance and its attainment, In: 12th Eucepa conference: mutiply board. Berlin. Germany. 8-16. 4. Boufi, S., Gonzalez, I., and Delgado-Aguilar, M.Q. 2016. Angels Pelach M., Mutje P., Nanofibrillated cellulose as an additive in papermaking process: A review. Carbohydrate Polymers. 154: 151–166. 5. Ellis, R.L., and Sendlachek, K.M. 1993. Recycled versus virgin-fiber characteristics: A comparison in secondary fiber recycling. R.J. Spangenberg (ed.). TAPPI Press. Atlanta. GA. 6. Eriksson, M., Notley, S.M., and Wagberg, L.J. 2005. The influence on paper strength properties when building multilayers of weak polyelectrolytes onto wood fibres. Journal of Colloid and Interface Science. 292: 38-45. 7. Ervasti, I., Miranda, R., and Kauranen, I. 2016. A global, comprehensive review of literature related to paper recycling: A pressing need for a uniform system of terms and definitions. Waste management. 48: 64-71. 8. Fernando, D., Muhi, D., Engstrand, P., and Daniel, G. 2011. Fundamental under-standing of pulp property development under different thermomechanical pulp refining conditions as observed by a new Simons’ staining method and SEM observation of the ultrastructure of fiber surfaces. Holzforschung. 65(6): 777–786. 9. Gharehkhani, S., Sadeghinezhad, E., Kazi, E.S.N., Hooman Yarmand, H., Badarudin, A., Safaei, M., and Mohd Zubir, M.M. 2015. Basic effects of pulp refining on fiber properties—A review. Carbohydrate Polymers., 115: 785–803. 10. Ghasemian, A., Ghaffari, M., and Ashori, A. 2012. Strength enhancing effect of cationic starch on mixed recycled and virgin pulps. Carbohydrate Polymers., 87(2): 1269–1274. 11. Gonzalez, I., Boufi, S., Pelach, M.A., Alcala, M., Vilaseca, F., and Mutje, P. 2012. Nanofibrillated cellulose as paper additive in eucalyptus pulps. BioResources., 7(4): 5167–5180. 12. Gurnagul, N. 1995. Sodium hydroxide addition during recycling: effects on fiber swelling and sheet strength. Tappi Journal. 78(12): 119–124. 13. Haavisto, S., Koskenhely, K., and Paulapuro, H. 2008. Effect of fiber flocculation and filling design on refiner loadability and refining characteristics. Bio Resources. 3(2): 403–424. 14. Hongta, Y. 2008. Fundamentals, Preparation and characterization of super hydrophobic wood fiber products, Ph.D. thesis of Paper Science and Engineering, School of Chemical and Bimolecular Engineering. Georgia Institute of Technology. Georgia. USA. 15. Hubbe, M. 2006. Bonding between cellulosic fibers in the absence and presence of dry-strength agent-A review. Bioresource., 1(2): 281-318. 16. Hubbe, M.A., Venditti, R.A., and Rojas, J.O. 2007. What happens to cellulosic fibers during papermaking and recycling? A Review. BioResources. 2(4): 739-788. 17. Jones, B.W., Venditti, R., Park, S., Jameel, H., and Koo, B. 2013. Enhancement in enzymatic hydrolysis by mechanical refining for pretreated hardwood lignocelluloses. Bioresource Technology. 147: 353–360. 18. Koubaa, A., and Koran, Z. 1995. Measure of the internal bond strength of paper/board. Tappi Journal., 78(3): 103−111. 19. Lingstrom, R. 2006. Formation of polyelectrolyte multilayers on fibers: influence on wettability and fiber/fiber interaction. Journal of Colloid and Interface Science., 296(2): 396-408. 20. Lundstrom-Hamala, L., Johansson, E., and Wagberg, L. 2010. Polyelectrolyte multilayers from cationic and anionic starch: Influence of charge density and salt concentration on the properties of adsorbed layers. Starch/Stärke., 62(2): 102-114. 21. Malton, S., Kuys, K., Parker, I., and Vanderhoek, N. 1998. Adsorption of cationic starch on eucalypt pulp fibers and fines. Appita Journal., 51(4): 292-298. 22. Maurer, H. 1998. Opportunities and challenges for Starch in the Paper industry. Starch/Stärke., 50: 396-402. 23. Miranda, R., Bobu, E., Grossmann, H., Stawicki, B., and Blanco, A. 2010. Factors influencing a higher use of recovered paper in the european paper industry. Cellulose Chemistry and Technology., 44(10): 419-430. 24. Navaee-Ardeh, S. 2007. A new model for maximizing the bending stiffness of a symmetric three-ply paper or board. Pulp and Paper Canada., 108(4): 45-47. 25. Nugroho, D.D.P. 2012. Low consistency refining of mixtures of softwood & hardwood bleached kraft: Effects of refining power, Thailand, Asian Institute of Technology. 26. Ristola, P. 2012. Impact of waste-to-energy on the demand and supply relationships of recycled fiber, Ph.D. Aalto University School of Science, Espoo, Finland. 27. Rudi, H., Hamzeh, Y., Ebrahimi, G., Behrooz, R., and Nazhad, M.M. 2012. Influence of pH and Conductivity on Properties of Paper Made of Polyelectrolyte Multilayered Recycled Fibers. Industrial and Engineering Chemistry Research., 51(34): 11054–11058. 28. Tesfaye, T., Sithole, B., Ramjugernath, D., and Chunilall, V. 2017. Valorisation of chicken feathers: Application in paper production. Journal of cleaner production., 164: 1324-1331. 29. Wagberg, L., Forsberg, S., Johansson, A., and Juntti, P. 2002. Engineering of fiber surface properties by application of the polyelectrolyte multilayer concept. Part 1: Modification of paper strength. Journal of pulp and paper science., 28(7): 222-228. 30. Wistara, N., and Young, R. 1999. Properties and treatments of pulps from recycled paper Part I. Physical and chemical properties of pulps. Cellulose., 6(4): 291–324. 31. Wistrand, I., Lingstrom, R., and Wagberg, L. 2007. Preparation of electrically conducting cellulose fibers utilizing polyelectrolyte multilayers of poly (3, 4-ethylenedioxythiophene): poly (styrene sulphonate) and poly (allyl amine). European Polymer Journal., 43(1): 4075-4091. 32. Xing, Q., Eadula, S.R., and Lvov, Y.M. 2007. Cellulose Fiber-Enzyme Composites Fabricated through Layer-by-Layer Nanoassembly. Biomacromolecules., 8(6): 1987-1991. | ||
آمار تعداد مشاهده مقاله: 789 تعداد دریافت فایل اصل مقاله: 709 |