1.Ahmadi Lajimi, A., Azadfallah, M., Hamzeh, Y., and Rahmaninia, M. 2020. Effect of cationic poly DADMAC based fixing agent on strength properties OCC pulp. Iranian J. of Wood and Paper Industries. 10: 4. 605-616. (In Persian)

2.Donger, P., Driscoll, M., Amidon, T., and Bujanovic, B. 2015. Lignin-Furfural based adhesive. Energies. 8: 8. 7897-7914.

3.Efhami Sisi, D., Sharifat, M., France Tunan, M., Taromian, A., and Jonoobi, M. 2018. Evaluation of furfural/urea complexes to improve physico-mechanical properties of birch wood. Wood and Forest Science and Technology Research J. 25: 4. 117-134. (In Persian)

4.Ghafari, R., Doost Hosseini, K., Mirshokraiee, S.A., and Abdolkhani, A. 2015. The study of thermal behavior and diffusion of furfural modified aldehyde resin urea form. J. of Forest and Wood Product. 68: 3. 479-490. (In Persian)

5.Girones, J., Pardini, G., Vilasea, F., Pelach, M.A., and Mutje, P. 2010. Recycling of paper mill sludge as filler/reinforcemeni in polypropylene composites. J. of Polymers and the Environment. 18: 3. 407-412.

6.Horace, K., Moo, Y., and Charles E, Ochola. 1999. The future of paper industry waste management. P 81-99, In: Proceedings of the Middle Atlantic Regional Conference, Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, USA.

7.Husseinsyah, S., Ismail, H., and Bakar, A. 2005. The effect of paper sludge content and size on properties of PP/EPDM composites. J. of Reinforced Plastic and Composites Polymer. 24: 2. 147-159.

8.Jungil, S., Han-Seung, Y., and Hyun-Joong, K. 2004. Physico-mechanical properties of paper sludge–thermoplastic polymer composites. Thermoplastic Composite Materials J. 17: 6. 509-522.

9.Jungil, S., Hyun-Joong, K., and Phi-Woo, L. 2001. Role of paper sludge particle size and extrusion temperature on performance of paper sludge–thermoplastic polymer composites. Applied Polymer Science J. 82: 11. 2709-2718.

10.Kord, B., and Taghizadeh Haratbar, D. 2014. Influence of fiber surface treatment on the physical and mechanical properties of wood flour-reinforced polypropylene bionanocomposites. J. of Thermoplastic Composite Materials.
29: 7. 979-992. (In Persian)

11.Lertsutthiwong, P., Khunthon, S., Siralertmukul, K., Noomun, K., and Chandrkrachang, S. 2008. New insulating particleboards prepared from mixture of solid wastes from tissue paper manufacturing and corn peel. Bioresource Technology J. 99: 11. 4841-4845.

12.Lv, S., Zhang, Y., Gu, J., and Tan, H. 2017. Biodegradation behavior and modeling of soil burial effect on degradation rate of PLA blended with starch and wood floor. Celloids and Surfaces B: Biointerfaces. 159: 800-808.

13.Miri, S.M., Ghasemian, A., and Ariaiee Monfared, M.H. 2016. Investigation of optical and mechanical properties of neutralized wastewater composite
pulp. Gorgan, J. of Wood and Forest Science and Technology. 23: 4. 293-314 (In Persian) 14.Mirshokraiee, S.A. 1995. Pulp and paper technology. Payame noor Publication. Tehran, Iran, Press, 500p. (In Persian)

15.Pappu, A., Saxena, M., and Asolekar, S.R. 2007. Solid wastes generation in India and their recycling potential in building materials. Building and Environment. Science Direct J. 42: 6. 2311-2320.

16.Passoni, V., Scarica, C., Levi, M., Turri, S., and Griffini, G. 2016. Fractionation of industrial softwood kraft lignin: Solvent selection as a tool for tailored material properties. ACS Sustainable Chemistry and Engineering J. 4: 4. 2232-2242.

17.Pourkarim Dodangeh, H., Jalali Torshizi, H., Rudi, H., and Ramezani, O. 2016. Performance of nano fibrillated cellulose (NFC) and chitosan bio-polymeric system on recycled and paper properties of old corrugated containers. Iranian J. of Wood and Paper Science Industries. 7: 2. 297-309. (In Persian)

18.Pourmahmoudi, S., Torabi Vostikolaee, I., and Omidbakhsh Amiri, E. 2017. Simulation of liquor concentration unit in Mazandaran wood and paper industry. Iranian J. of Wood and Paper Science Research. 32: 4. 565-575.

19.Rezayati Charani, P., and Moradian, M.H. 2019. Utilization cellulose nanofibers and cationic polymers to improve breaking length of paper. J. of Cellulose Chemistry and Technology. 53: 7-8. 767-774. (In Persian)

20.Schafer, M., and Raffael, E. 2000.On the Formaldehyde Release of Wood. Holzalsroh-Und Werkstoff.58: 4. 259-264.

21.Standard test method for determining aerobic biodegradation in soil of plastic materials or residual plastic materials after composting, Annual book of ASTM, American Society for Testing and Materials, Philadelphia, PA. D5988-03, 2003.

22.Technical association of pulp and paper industry. 2009. Standard test methods. Tappi Press, Atlanta, GA. USA.

23.Vaysi, R., and Kord, B. 2013. The effect of H2O2 are bleaching and DTPA spraying on the brightness stability
of hornbeam CMP pulp following accelerated irradiation aging. Bioresource J. 8: 2. 1909-1917. (In Persian)