تأثیر پلی اکریل آمید کاتیونی بر ویژگی‌های خمیر بازیافتی کارتن کنگره‌ای کهنه (OCC) تقویت شده با نانو الیاف لیگنوسلولزی Paulownia fortunei

1.Rezayati Charani, P., and Moradian, M.H. 2019. Utilization of cellulose nanofibers and cationic polymers to improve breakinglength of paper. Cellulose Chemistry and Technology. 53: 7. 767-774.

2.Pourbaba, R., Izadyar, S., Hamzeh, Y., and Ashori, A. 2018. Effect of using cellulose nanofibers and cellulosic papermaking fines simultaneously on the properties of de-inked recycled pulp. Forest and Wood Products. 71: 3. 263-273.

3.Afra, E., Yousefi, H., Hadilam, M.M., and Nishino, T. 2013. Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps, Carbohydrate Polymers. 97: 725-730.

4.Afra, E., Yousefi, H., and Aliniya Lakani, S. 2014. Properties of chemi-mechanical pulp filled with Nanofibrillated and Microcrystalline cellulose. J. of Biobased Materials and Bioenergy. 8: 1-6.

5.Afra, E., Mohammadnejad, S., and Saraeyan, A. 2016. Cellulose nanofibrils as coating material and its effects on paper. Progress in Organic Coating. 101: 455-460.

6.Wu, M.R., Paris, J., and van de Ven, T.G. 2007. Flocculation of papermaking fines by poly (ethylene oxide) and various cofactors: Effects of PEO entanglement, salt and fines properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 303: 3. 211-218.

7.Hubbe, M.A., Nanko, H., and McNeal, M.R. 2009. Retention aid polymer interactions with cellulosic surfaces and suspensions: A review. BioResources. 4: 2. 850-906.

8.Taherkhani, Z. 2021. Investigation of polyacrylamide polyelectrolytes performance in water purification. Iran Polymer Technology Research and Development. 6: 1. 39-50. (In Persian)

9.Xiong, B., Loss, R.D., Shields, D., Pawlik, T., Hochreiter, R., Zydney, A.L., and Kumar, M. 2018. Polyacrylamide degradation and its implications in environmental systems. NPJ Clean Water. 1: 1. 1-9.

10.Yang, K., Chen, J., Fu, Q., Dun, X., and Yao, C. 2020. Preparation of novel amphoteric polyacrylamide and its synergistic retention with cationic polymers. E-Polymers. 20: 1. 162-170.

11.Rezayati-Charani, P., Moradian, M.H., and Saadatnia, M.A. 2018. Sequence analysis using cellulose nanofibers, cationic starch and polyacrylamide in the paper tensile strength. J. of Wood and Forest Science and Technology. 25: 3. 73-86.

12.Yousefi, H., Azari, V., and Khazaeian, A. 2018. Direct mechanical production of wood nanofibers from raw wood microparticles with no chemical treatment. Industrial Crops & Products. 115: 26-31.

13.Moradian, M.H., Rezayati Charani, P., and Mousavi, S.F. 2020. Strengthening tensile strength of wet and dry layer of paper from chemical-mechanical pulp by cellulose nanofibers and PAE. Environmental Sciences Studies J. 5: 2. 2458-2465.

14.Afra, E. 2003. Properties of paper. Agricultural Sciences Press. 392p. (In Persian)

15.Hubbe, M.A. 2006. Bonding between cellulosic fibers in the absence and presence of dry-strength OD dry strength agents-a review. BioResources. 1: 2. 281-318.

16.Ekhtera, M.H., Rezayati Charani, P., Ramezani, O., and Azadfallah, M. 2008. Effects of poly-aluminum chloride, starch, alum, and rosin on the rosin sizing, strength, and microscopic appearance of paper prepared from old corrugated container (OCC) pulp. Bioresources Technology. 4: 2. 291-318.

17.Hassan, M.L., Bras, J., Mauret, E., Fadel, S.M., Hassan, E.A., and El-Wakil, N.A. 2015. Palm rachis microfibrillated cellulose and oxidized-microfibrillated cellulose for improving paper sheets properties of unbeaten softwood and bagasse pulps. J. Industrial Crops and Products. 64: 9-15.

18.Wiśniewska, M. 2018. Polyacrylamide (PAM). High performance polymers and their nanocomposites. Scrivener Publishing LLC. pp. 105-131.

19.Hadilam, M., Afra, E., and Yousefi, H. 2013. Effect of using nano cellulose fibers on bagas paper properties. J. of Wood and Forest Science and Technology. 66: 3. 351-366. (In Persian)

20.Yousefi, H., Faezipour, M., Hedhazi, S., Mazhari Mousavi, M., Azusa, Y., and Heidari, A.H. 2013. Comparative study of paper and nanopaper properties prepared from bacterial cellulose nanofibers and fibers/ground cellulose nanofibers of canola straw. J. Industrial Crops and Products. 43: 732-737.

21.Ghaderi, M., Mousavi, M., Yousefi, H., and Labbafi, M. 2014. All-cellulose nanocomposite film made from bagasse cellulose nanofibers for food packaging application. J. Carbohydrate polymers. 104: 59-65.